Which to buy first, a lathe or a mill? It’s a tough question for the aspiring home machinist with limited funds to spend on machine tools, but of course the correct answer is a lathe. With a lathe, we ...

The Tiger Mill Scale wheel from Weiler Abrasives is an abrasive product designed to quickly and efficiently remove mill scale ...

Ingersoll’s MasterMill is over 26-feet wide between the columns. It can produce parts up to 26 ft. WX100 ft. LX21 ft. H, and the workzone includes a 16-ft. diameter turning and milling table.

Milling machines are nice to have around for precisely drilling holes or removing unwanted material from a part. However, they can be expensive and may not get a lot of use, two reasons why a mill ...

Modern milling machines look much the same as they did 30 years ago. However, they now must cut superalloys, titanium, and high-tensile steels to closer tolerances and at faster rates than before. To ...

Now firmly established as road-building technologies, cold milling and the use of reclaimed asphalt pavement have placed the providers of milling machines in a good position at this time. "There's ...

The BOMAG BM 2200/75 cold mill, using a 760-horsepower engine, can mill “half-lane” widths reaching to 86.6 inches at depths of to 13.8 inches. The machine can be fitted with a range of optional quick ...

The bulk of the milling machine market consists of half-lane machines weighing from 60,000 to 90,000 pounds and typically equipped with roughly 7-foot-wide cutting drums, which are powered by 600- to ...